Heat Pump
Solution Technical Highlights
1. One-click worry-free (only need to install and start once, intelligent control mode)
Simplified operation:No need for complex settings, after installation, the system will automatically complete self-checking, parameter configuration (such as water temperature, pressure calibration) and scene adaptation (heating, cooling, hot water demand) to reduce user learning costs and installation error risks.
Intelligent control mode:The system optimizes operation according to preset logic, automatically identifies seasons, time periods and user habits, and dynamically switches heating, cooling and hot water supply modes (such as automatically starting floor heating + domestic hot water priority in winter), without manual frequent adjustment, reducing efficiency decline or failure caused by human error, improving ease of use, and ensuring the continuity of comfort in the home environment.
2. Automatic energy saving (variable water temperature)
Precise energy consumption control: According to actual user needs, the water temperature is dynamically adjusted in combination with weather data, such as lowering the water temperature setting when heating at low temperatures, and heating on demand when using high temperatures.
Balance between comfort and energy saving: Through variable water temperature technology, while satisfying users' indoor temperature and hot water comfort, it minimizes electric heat loss and avoids energy waste. Long-term use can significantly reduce energy expenses.
Adapt to different scenarios: Supports customized or preset multiple water temperature modes (such as "economic mode", "comfort mode", "fast heating mode"), and flexibly responds to differentiated needs such as family gatherings and daily life.
3. Energy management (cogeneration of hot water, cooling, heat and power, external heat source management, etc.)
Multi-energy synergy: Integrate the output of three energy sources: cooling, heating and electricity. For example, use the waste heat of heat pumps to supply domestic hot water to reduce repeated heating energy consumption; at the same time, connect to external heat sources (such as solar energy, geothermal energy, gas boilers) to achieve "multi-energy complementarity" and reduce dependence on a single energy source.
Cost optimization: Through external heat source management, give priority to the use of low-cost energy (such as electric heating during off-peak hours and solar thermal collection) to reduce operating costs. It is especially suitable for families in multi-climate areas, combining gas auxiliary heating in winter and using natural cold sources for cooling in summer.
Environmental protection and carbon reduction: Support the access of renewable energy, reduce fossil energy consumption, comply with the trend of green homes, and enhance the environmental protection attributes of families (such as reducing carbon emissions and pollutant emissions).
4.IOT service backend
Remote monitoring and control: Users can view the operating status of the equipment (such as water temperature, energy consumption, and working mode) in real time through mobile phone APP or cloud platform, remotely adjust parameters (such as turning on heating in advance and turning off cooling), and receive early warning notifications (such as filter blockage and insufficient refrigerant).
Data management: The backend provides energy consumption statistics and operation reports to help users analyze usage habits and optimize equipment settings (such as finding abnormally high energy consumption during a certain period of time, and adjusting the mode in a targeted manner).
Fault warning and maintenance: Real-time monitoring of equipment operation data, active warning of potential faults (such as sensor abnormalities, compressor overheating) and analysis of equipment health, and provide preventive maintenance suggestions.
5. Online OTA service
Continuous function upgrade: Update system firmware through remote OTA, add new functions (such as push new energy-saving algorithms, compatible with new protocols, i.e. future hydrogen energy interfaces), fix system vulnerabilities, and extend the life cycle of the device.
Convenient maintenance experience: remotely diagnose faults (such as sensor calibration), download troubleshooting guides by yourself, avoid the cumbersome process of returning traditional equipment to the factory or manually upgrading, reduce after-sales costs, and enhance users' trust in the brand.
Chillerwater Boiler
Extendable Solution Areas
System transformation: communication with electronic faucet control board (multi-valve collaborative control) After the system transformation, different valves on the faucet can be efficiently driven through wired or wireless communication to achieve intelligent switching and remote management of cooling water, filtered water and sparkling water. Users can select the water type (such as ice water, room temperature water, sparkling water) through the touch screen, physical button or mobile phone APP.
System transformation: adding a water pump driver board (automatic sparkling water preparation) After the system transformation, the water pump is adjusted or closed-loop driven by a dedicated driver board to achieve high-precision flow and pressure control for automatic preparation of sparkling water. Users can select the bubble strength (weak/medium/strong), and the system automatically matches the pressure (2Bar/4Bar/6Bar)
Solution Technical Highlights
1. Intelligent constant temperature control system
Water temperature stability guarantee: Through high-precision NTC temperature sensor (±0.1℃ detection accuracy) and PID algorithm, ±0.5℃ precise control of the water temperature range of 2-100℃ is achieved, which brings users a constant temperature and stable experience, avoids discomfort and safety hazards caused by alternating hot and cold, and also meets the needs of home and commercial scenarios.
Dynamic power adjustment: Automatically adjust the heating power linear adjustment according to the deviation between the water temperature and the target value to avoid energy waste.
Safety protection: Prevent overheating (such as a sudden rise in the water temperature of the water boiler) or overcooling (freezing of the chiller) to avoid equipment damage or user scalding risks.
2. Power-off memory function
Personalized settings retention: Automatically store the last valid operating parameters (such as temperature setting, working mode) after power failure, and no manual intervention is required after power is restored.
Multi-device collaborative protection: When the system is connected to multiple external devices (such as filtration system, sparkling water machine), the memory function can synchronously retain the linkage logic of each module (such as automatically starting the CO₂ valve when the sparkling water mode is turned on), avoiding device status confusion and circuit impact caused by power failure, and extending the life of the compressor and heating tube.
3. Support Tuya Wi-Fi control
Remote management: Remote power on and off, temperature adjustment, and mode switching are realized through the mobile phone APP, and multi-device group management is supported (such as distinguishing kitchen boilers from bar counter chillers). Real-time monitoring of energy consumption data, support for abnormal alarm push, help users to promptly discover equipment failures (such as sensor failure, valve blockage).
Energy-saving strategy linkage: Combined with the analysis of peak and valley electricity price data (must be connected to the meter API), hot water is automatically reserved during the valley electricity period, and the peak electricity period is switched to the insulation mode, effectively reducing electricity expenses.
Business operation and maintenance upgrade: Chain stores can centrally control multiple devices through the Tuya Cloud platform to achieve standardized management and reduce regional operation and maintenance costs.
4. Support RF433 wireless transmitter remote control
Network-free environment control: supports up to 30 meters through the wall control, and the basic functions of the device can still be operated by the remote control in the area where the Wi-Fi signal is weak or disconnected. In the event of a network failure, RF433 is used as an emergency control channel to ensure the availability of the device.
Physical button operation: The remote control is configured with custom shortcut keys, and the preset parameters are triggered with one button, which is especially suitable for the elderly or temporary emergency scenarios (such as normal operation when Wi-Fi fails).
Multi-device compatible group control: It can be linked with existing smart home devices (such as smart sockets, thermostats) to build a localized smart ecosystem (such as turning on the kitchen lights synchronously when the boiler is started remotely).
5. Compatible with water boilers and chillers
System integration simplification: A single control panel is compatible with multiple devices such as water boilers (100℃ constant temperature), chillers (2-15℃ cooling), soda water machines (sparkling water preparation), etc., to achieve coordinated control of cold/hot water systems (such as coffee machines that require 98℃ hot water and 5℃ ice water at the same time). At the same time, it supports dual water source switching to meet different water quality requirements.
Space and cost optimization: The device size saves installation space and wiring costs compared to independent control solutions.
Improved maintenance convenience: The unified control interface and fault diagnosis system reduce the difficulty of technician training and maintenance.
Cooling Fan
Extendable Solution Areas
1. After adjustment, digital display can be added, so that users can intuitively monitor the fan operation status and environmental parameters, and carry out interactive upgrades and intelligent control with users as the center, creating "visible" intelligent environmental management.
2.High-speed DC fan driver boards can be developed to support higher speeds, more precise speed control and lower noise, and provide "high reliability and high energy efficiency" heat dissipation guarantee based on industrial needs.
Solution Technical Highlights
1. Low, medium and high wind speeds
Personalized comfort experience: The three wind speeds allow users to flexibly switch gears according to ambient temperature, space size and personal preferences to meet different usage scenarios.
Balance between energy saving and noise: Low power consumption saves electricity daily, and the noise is equivalent to a whisper, which is suitable for quiet scenes such as libraries and baby rooms; mid-range balances cooling efficiency and energy consumption, taking into account safety and coolness, without frequent adjustments, suitable for special groups such as children, the elderly and pregnant women. High-end noise is slightly higher than normal conversation, suitable for strong wind needs.
2. Natural wind mode Health protection upgrade:
- This mode randomly adjusts the wind speed through an algorithm, so that the wind strength presents a "rise-fall-flat" change, reproducing the breeze experience in nature, avoiding the dryness and fatigue caused by continuous single wind feeling, and increasing human comfort.
- With the swing head function, a three-dimensional airflow circulation is formed to accelerate indoor air replacement, especially suitable for small apartments with poor ventilation, reducing the probability of air conditioning disease.
Intelligent linkage expansion: supports linkage with temperature and humidity sensors to enhance the amplitude of natural wind fluctuations and accelerate the dissipation of moisture from clothes and bedding. When paired with the aromatherapy module, intermittent flow can diffuse the fragrance more evenly and avoid uneven concentration.
3. Sleep mode
Sleep quality assurance: The sleep mode will automatically perform "progressive deceleration" according to different sleep stages, and the fan will slow down to a low noise level to reduce noise interference. Synchronously turn on the "night display mode", the display brightness only displays the time and gear, and turns off non-essential indicators.
Intelligent power consumption control: Automatically adjust the output power consumption when the temperature drops at night, and the power consumption saves power compared to the normal mode.
4. Timing function
Flexible and convenient use: Users can pre-set the fan running time or shutdown time to improve the convenience of use and meet the needs of different scenarios.
Energy saving and safety double insurance: avoids the waste of electricity caused by the fan idling for a long time, while reducing the risk of failure when unattended,