Solution Technical Highlights
Electric Heater
1. Heating gear switching function
Flexible adaptation needs: low, medium and high three-gear adjustment, according to the actual use scenario and temperature requirements, free switching of heating gears to meet different ambient temperatures and improve comfort.
Energy saving and consumption reduction: Select power on demand to avoid wasting electricity by running at full power. Reduce high-load operation time, reduce heating element loss, and extend life.
2. Fan control function
Quiet experience: Turn off the fan or run at low speed at night, reduce noise and volume, suitable for scenes such as bedrooms and study rooms.
Efficient heat dissipation: Accelerate air circulation, thereby diffusing heat, shortening the heating time, and adapting to large spaces (such as living rooms and offices).
Energy-saving balance: Independently control the fan and heating to avoid continuous power consumption of the fan (such as turning off the fan when only heating is required) to flexibly meet usage needs.
3. Temperature setting function
Precise temperature control: Set the target temperature to avoid overheating or underheating and reduce the frequency of manual adjustment.
Automatic energy saving: Switch to standby or low power mode after reaching the set temperature to save standby energy consumption.
Health protection: prevent high temperature and dryness, and protect people with sensitive respiratory tract (such as children and the elderly).
4. Timed on/off function
Convenient and intelligent: set the on/off time in advance, such as setting it to start at 7 am, so you can enjoy warmth when you get up;Automatically shut down at 11 pm to avoid running all night.
Energy saving and power saving: avoid ineffective operation and effectively save electricity. For example, it is turned off during work during the day, and no energy loss is generated; when sleeping at night, set the time to automatically shut down to prevent energy waste caused by heating all night, further reducing the cost of use.
Unattended safety: turn off at a fixed time when going out to reduce the risk of fire, especially suitable for commercial scenarios (such as offices and shops).
5.WI-FI control
Remote management: remotely turn on and off or adjust the temperature through the mobile phone APP to respond to sudden needs (such as going home early to preheat).
Intelligent linkage: Link with temperature and humidity sensors and air conditioners to automatically adjust the room temperature.
6.Sleep mode
Comfortable sleep: automatically lower the temperature, reduce noise and turn off the display light at night to reduce interference.
Energy-saving operation: switch to low-power operation mode during sleep to save energy to the maximum extent, in line with the concept of green energy-saving life.
Health care: avoid high temperatures all night causing dry air and reduce skin discomfort.
7.Child lock
Safety protection: lock the panel buttons to prevent children from accidentally touching them and causing safety accidents such as high temperature burns and electric shock.
Equipment protection: prevent misoperation from causing system settings confusion or circuit overload (such as frequent gear switching) to reduce the failure rate.
8.Screen off mode
Reduce light pollution: after turning off the display, the light displayed on the screen and the flashing indicator light can be eliminated to avoid light interference (especially at night) and affect sleep quality.
Energy saving and consumption reduction: Reduce screen power consumption, reduce overall energy consumption to a certain extent, meet the requirements of energy saving and environmental protection, and extend the life of the device.
9. Memory function
Seamless use experience: Automatically restore the last settings (such as temperature, gear) after power failure and restart, without repeated operations.
Personalized adaptation: Remember user preferences, continue personalized settings, and improve convenience of use.
Electric Oven
1. Temperature range (35-230℃)
Multi-scenario cooking: low temperature application (35-60℃), supports fermentation of dough, thawing of ingredients, and heat preservation of cooked food; high temperature application (200-230℃), meets the needs of professional baking and high-temperature roasting.
Precise temperature control: ±1℃ accuracy, improves cooking success rate, and avoids overcooking or burning of food.
Energy saving and time saving: quickly heats up to the target temperature, reduces preheating waiting time, and reduces ineffective energy consumption.
2. Multi-function mode
Three-level furnace mode: upper and lower heating tubes work synchronously, the power of the heating tubes can be freely adjusted, and the heat is evenly distributed, which is suitable for baking scenes such as cakes and biscuits that require stable temperature to avoid uneven coloring.
Three-blast furnace mode: three sets of heating tubes combined with high-speed fans circulate hot air, effectively shortening the cooking time, suitable for commercial scenes with frequent use.
Hot air mode: high-temperature airflow quickly dehydrates, used to make snacks such as dried fruits and meat jerky, retaining the taste while extending the shelf life.
Natural wind mode: slow roasting at low temperature (80-120℃), suitable for thick cuts of meat, so that the meat fibers are fully softened to lock in the juice and improve the taste.
Fermentation mode: constant temperature and humidity, one-button start through the LCD screen, reducing manual intervention, meeting the needs of home baking and brewing.
3. Manual humidification function
Flexible control and use: adjust the humidity at any time according to the recipe requirements to adapt to diverse cooking needs. For example, when baking European bread, the manual humidification button releases steam, which is injected to form a steam environment, helping the dough skin to form a crispy shell, while maintaining a soft and porous structure inside. When grilling meat, spray water mist to prevent the surface from drying and hardening, keeping the meat tender and juicy.
Healthy cooking: reduce the addition of fat (such as oil-free crispy roasted chicken wings) to meet the needs of a low-fat diet.
4. Wide voltage and frequency compatibility (85-265VAC, 50/60Hz)
Global cross-border universal: Adapt to different national power grid standards (such as 120V/60Hz in the United States and 230V/50Hz in Europe), without the need for additional transformers, lowering the threshold for overseas users.
Intelligent output adjustment: In response to voltage fluctuations (such as unstable voltage in rural areas), the device can automatically adjust the power output to ensure that the temperature fluctuation is controlled within ±5℃, avoiding baking failures caused by voltage drops, and avoiding equipment damage or downtime risks.
Commercial scene adaptation: Restaurants, hotels, baking workshops and other places can still operate stably during peak power grid loads to meet batch cooking needs.
Energy saving and loss reduction: The wide voltage design reduces power conversion losses and improves energy efficiency.